IT is an ISO image and MUST be burnt using the special program in the link, your normal burning software will very likely NOT do this.įollow the instructions carefully please. USE THIS LINK for the PUPPY download and follow everything else as per the guide. THE LINK TO PUPPY no longer takes you to the indicated version ie: Lupo5.2 If that does not work make this CD and see if that will boot. If you have another monitor - try that first. There is a slight chance that it is the connections from the motherboard to your laptop screen and the various aspects of that - it is more than just a simple cable connection. I suspect that your graphics on the motherboard is faulty or indeed other hardware defects POSSIBLY caused by a power issue. When I was cleaning up my 20 odd emails from GeekstoGo, I must have deleted yours before I read it by accident. Blue Screen (BSOD) errors denote hardware failure within Windows (probably. It loads all the files fomr the setup DVD and the Windows Starting screen comes up, but once it tries to access the HDD, the screen goes black and. ![]() I would format the USB flash disk on another computer an test the disk. If you can boot to safe mode (probably not) or a Windows OS disk and access the command prompt ( cmd) in the repair options you can run a disk check which can repair a corrupt filesystem/ bad sectors, blocks, and clusters. The HDD is last in the boot sequence in BIOS. Fist run check disk: On a CMD window type chkdsk x: /f (replace x: by the drive letter of you USB flash disk). UNMOUNTABLEBOOTVOLUME BSOD's usually point to a failing hard drive or corrupt filesystem. That is really no excuse, as I would have received the notification of your post. it will not successfully boot into the dvd setup program, thus I can not get to the repair option or the command prompt. My apologies for missing your reply on 18 Dec. Is that even the right disc?Īny help would be much appreciated, thank you When I try to run the Operating System disc I got with the laptop it asks me about the language and stuff and then freezes on the light blue screen again. Unstable PC performance is often caused by outdated or corrupt drivers. Again, the BIOS recognizes the drive just fine, but running Windows XP setup again tells me that it cannot detect any hard drives. I replaced the hard drives with a spare that I had (2.5' Seagate 7200RPM - SATA) that is a known working hard drive. Could that be the issue? I have since bought a new official charger and battery.įirst of all I get a screen asking if I want to Launch Startup Repair (which then freezes on the light blue screen) or Start Windows Normally (which gives me BSOD and restarts). Re: Blue Screen - Unmountable Boot Volume Ok, an update. The last time I used the laptop before this happened the battery had finally give out - it was saying that it was not charging at all and was just running off mains. (Of course you can use a Windows 7 Installation Disk as well. I don't know what the problem is but I must confess that I was not using an official charger and it was killing off my battery - it had been telling me for a good few months that my battery would need replacing. The main method to fix is to boot with a Windows 7 disk and use the Command Prompt to run : Chkdsk C: /f /r (spaces after k, C:, and /f such as Chkdsk C: /f /r using just one space each time) If you need a Windows 7 Repair Disk the method to make one is below. Note: You can reset the BIOS, either by carefully removing the battery on the motherboard or in the BIOS menu by pressing Setup defaults Fail-safe defaults or Optimized defaults ( F9 or F6 or F7).Hi there - I have a Dell Inspiron 1545 running Windows 7 which all of the sudden will not boot and gives me the BSOD with the error UNMOUNTABLE_BOOT_VOLUME 0x000000ED. Save the changes by pressing F10 (which stands for Save and exit).ĭO NOT MODIFY BIOS ON YOUR OWN, UNLESS YOU KNOW WHAT YOU ARE DOING. Once the BIOS interface appears find Integrated Peripherals, press ENTER and find (PCH) Sata Control mode (or Main -> Sata Mode). ![]() Restart (or turn on the computer) and press DEL(ETE) or F12 before the Windows Logo appears. Try toggling the SATA controller mode in the BIOS: ![]() If the SATA controller gets toggled from ATA to AHCI mode (or vice versa), then Windows will not be able to talk to the SATA controller because the different modes require different drivers. When troubleshooting this error, your task is to find out why the Windows kernel is confused and fix the cause of the confusion.Ĭheck The SATA controller configuration in BIOS. Either it cannot find the rest of itself, or it cannot read the system file at the location it believes it is stored. When your computer crashes and this stop code appears, the NTOSKRNL is confused.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |